SKYRC NC2500 Pro NiMH NiCd Charger Baterai w/Break-in Dinamo Tamiya

Born Versatile & 3 in One
6-Bay AA/AAA
Large LCD
QC3.0
Motor Run-in

This unit fulfills all your imagination as a NiMH/NiCd battery charger.
Six independent slots to charge six AA/AAA (NiMH/NiCd) batteries simultaneously.
Large LCD display. Information at a glance:
current, voltage, capacity, elapsed time, and working mode.
Measuring Battery Internal Resistance
Analyzing motor run-in
The NC2500 Pro has up to six independent slots to charge six cells simultaneously with a maximum charging current of 2.5A. Once high internal resistance is detected, the charging current will be reduced automatically to reduce overall heating to protect the battery.

Got useless batteries in your drawer?
With the NC2500 Pro, users can try to rescue useless or malfunctioning batteries. Although it is illegal to dispose of these batteries improperly, you have a chance to save a dying battery. After trying all the modes as in the manual, see the battery rescue steps as simple as 1-2-3:
1. Use REFRESH & ANALYZE mode one to three times.
2. Change to BREAK-IN mode if the capacity is still low.
3. If the second step can increase the battery capacity by more than 10%, please try BREAK-IN mode one to three more times. If there is no significant improvement and the actual battery capacity is less than 60% of its rated capacity. The battery may be at the end of its life and needs to be replaced. Display

Display
Type: LCD
Charging and Discharging
Input Power: DC 12V/ 3A
Battery Type: NiMH/NiCD
Battery Size: AA/AAA
Charging Rate: 0.1-2.5A
Discharging Rate: 0.1-1.5A
Discharge Limit Voltage: 0.8V-1.0V Adjustable
USB Output: QC3.0 5V/9V 3A(18W)
-V: 1-8mV Adjustable
Drip Current: 30-99mA/OFF
Over Temperature Protection: 55-65/131-149 Adjustable

Included
NC2500 Pro Charger X1
Manual X1
12V/3A Power Supply X1

Contact our customer service if more information is needed.